2016 was a wedding onslaught and this site was not updated nearly enough. Going to set the calendar reminders to post Mondays during lunch time for this summer. To get up to speed, so far this year have had 4 weekends out at boat yard. One to mostly survey and clean the hull (esp the water line) with Muriatic acid. And then one big day of angle grinding the keel down to the metal again. (Huge thanks to Joe for helping that day). Then a few rainy weekends so wasn’t going to paint those days. And then a trip out a few weeks later, where used acid to remove rust accumulation. Rinsed. Let it dry. Then applied a lot of Star Brite Rust Eater and Converter. Let that sit for 10 minutes and then went back and applied more and moved around with microfiber cloth to try and get any cracks, etc. Let that dry for 2 hours and then put on a coat of the HS High Solids Barrier coat. Stuff is awesome. Goes on thick. Put on a really thorough coat. And then headed home. Then this last weekend went back out early early and put on another HS barrier coat first thing in the morning. Let dry for 4 hours and taped off the lines and then went with the west marine standard blue anti fouling paint. And then after letting dry. The boat is in the water. Now the fun stuff can begin. This coming weekend we want to take out any wood not attached and sand and seal and put back. Also want to remove decayed wheel leather and thinking of going with thin cord neatly knotted over and over all the way around the wheel instead of foam and leather.